Epson TM T90 Printer "line copy using" Questions

...copy of Crystal reports and bar codes 128 font. And it's not working. Totally at a loss. Any help will be appricated. Thank you Silvio Very possible you have a bad printhead. If you have a bad dot in ...

...copy using the automatic feeder tray, a line appears all the way down on the right side of the copies. When making a copy manually by laying the paper down on the glass plate, no line appears on the ...

...line there? Now make a copy with the adf. Is the line there? If so, you need to clean the small glass under the doc feeder. It looks like a glass ****, about a 1/2 inch wide. Clean it with windex and ...

...line down center of newly copied page when using Auto feeder to copy When using auto feeder to copy mutiple pages, each copied page ends up with a single black line about 3" from the left edge of ...

copy using the automatic feeder on top. If the feeder copy has the lines but the glass copy does not then the problem is coming from the ADF scanner glass which is the thin strip of glass that is just

...copy board glass are the lines there? If not, make a copy using the adf, if they are there you need to clean the smaller , thinner piece of glass to the right side of the copy board glass. Good ...

...lines that were only the tops ( or bottoms) of the letters in a line or complete lines that did not copy at all. did you run a test page, or a head clean and alignment first? ...

...line prints down the center of each copy. If I use the platen glass to make copies, the line does not appear on the copies. Any idea how to make this stop? Thanks, Mike I had the same problem. I ...

...copy is reasonably good sometimes. I am using a drum the other side end of which is damaged probably because the drum surface touches the lower (don't know technical part description) spare part ...

...copy lifting the lid, using the scanner, there is no line. Any thoughts, suggestions, solutions? TRY FOLLOWING THIS LINK ...