Epson Stylus CX5400 All-In-One InkJet Printer "waste" Questions

need replacement waste ink pad Had removed the felt waste ink pad, cleaned and had it drying to put it back in the printer. Got thrown out with the paper towel by mistake. Oops. Anyone know where I ...

Printer send s message Life of parts ending Hi, The "end of life" message means that the waste pads are full of waste ink. You need to either: get the printer serviced at an Epson service center OR ...

epson stylus 830Uink pads full not printing help The Waste Ink Pads in your printer are saturated with ink and the waste ink counter has exceeded its limit. The Waste Ink Pads should be replaced as ...

...ink lights flashing,/power light off, /mac os x tiger 10.4 Sound like the maintenance request (ie: waste ink pads are full). This has been documented in detail so check the link below for more info' ...

...R320 Service required message HELP!!!!! Pushed the reset buttons and now the Screen now says: CLEAR WASTE CTR INK , FINISHED TURN OFF PRINTER POWER. I DID THE ABOVE BUT NOW THE PRINTER WILL NOT POWER ...

...to be reset, you need a software resetter,you can use SSC utility. But you must clean first the waste pad inside the printer or the best thing there is to move the waste hose outside the ...

printer flashes up service required some parts maybe at the end of their life The waste ink counter has run out. The blotter like waste ink thing in the bottom can be removed and rinsed (takes a lot ...

epson R230 service required Two things you need to do. 1. Reset the waste ink counter and for the R230 you should find the SSC utility is still compatible. That said, if you're using Windows Vista or ...

How do I reset the sensor after a waste pad error message for an Epson 7000? The pad is not full and I need to reset so I can print. Hi Normally your remedy is to replace the "Waste Ink Pad/Pads" with

...at the end of their service life This problem is described in detail here: http://www.octoink.co.uk/waste Basically your printers waste ink pads are considered full by the printer (thanks to a little ...