...What have we done wrong? Start the machine with the lid raised so you can see the print head. I think you find the drive belt for the head is going round but the head is not moving. This ...
Question about Epson Stylus Office Equipment & Supplies
the print head doesn't appear to be connected to The print head doesn't appear to be connected to the belt drive on my Epson C62. Is there a clip that has come undone that I can re-attach? Prior
Question about Epson Stylus Office Equipment & Supplies
... Thank you. There is a "belt" that has a pulley at each end, and the belt is connected to the print-head. If you open the lid, you should hear the motor spinning the pulleys, and pulling the belt. If ...
...rubber belt with teeth on it, first check it's still attached at both ends. If it can't move your head along its slider, it will be because the head is in the locked position. There will be a
...to call technical support. Printer is over 3 years old and no warranty available. Any ideas ? The head assembly is attached to a photo sensor that tells the printer when it is at the ends of its ...
Question about Epson Stylus Office Equipment & Supplies
print head not moving..green and red light on when turn on and off ... green and red light are on and print head is not moving Check the carriage belt,
...haed seem to be in good condition, and the inks are new, Any ideas Thanks Check that your printer head is not jammed or move freely. For that put oil in head carrier . Also clean dust from head ...
...problem is about, my printer when turn on, can makes grinding sound and cannot to print unless the head come to a halt during initialization process, upon turning on your printer there is no way you ...
power on problem When printer is powered on, the print head bangs on each side. Does anyone out there know how to time an Epson Stylus C84???? There is an encoded registration strip just behind the ...
Question about Epson Stylus Office Equipment & Supplies
...can be easily purchased or is my Epson ready to be buried? Examine the belt that powers the print head, see if it is excessively sloppy, check the head moves freely along the print head bar, if it ...
210 questions posted
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
454 Questions
438 Questions