Epson FX 890 Matrix Printer "auto tear" Questions

how to set auto tear off for paper You will have to get the instructions from teh website if you do not have the manual for these setting adjustments

Auto Tear off for Epson LX300+ When I use continuous paper with the push tractor, paper should advance the paper perforation to the tear-off position where I can easily tear off the printed page. When

...auto tear off position Most of these older printers use a special key to enter setup...usually upon power-up. Have paper inserted, because that is where it prints it's configuration. * It will ...

tear-off position? Would great appreciate a solution to this! Try this to have the printer auto-sense the size of the labels: 1. Make sure that printer power is off. 2. Press and hold the feed button.

...is poor or weak. When tearing you labels off, feed them out before tearing them off, then hit the auto-align. See if that helps it. Try pushing a normal playing card under the metal cutter that ...

Auto tear off is on but the skip over perforation is off. Page length is 8 inches. I first oiled the bar once more and while the printer was off, moved the head across the bar forcefully several times

...auto or manually) on my 2" circles. It consistantly puts the label perforation about 1/8" outside the tear off point. It has a fixed transmissive sensor, using non-continous labels with thermal ...

paper jammed Hi there, Paper Jams Cause 1 : Paper jams in the paper output slot/Auto Sheet Feeder. Action : Remove the paper according to the following procedure. a) Slowly pull the paper out, either ...

...and then press [Black] or [Color]. Paper Jams : Cause : Paper jams in the paper output slot/ Auto Sheet Feeder. Landscape Credit Card sized paper jams inside the machine. Action : Remove the ...

...auto tear paper after printing receipt is completed. I am a software engineer. My client is using epson thermal printer TM-T88II printer and is using a software by which receipt is auto cutted after ...