Epson LX-300 Matrix Printer "change film ribbon" Questions

change but all the spaces between and after the words or text have dots.. it beggins from the very head of the paper till the bottom.. may ask your help if what is going on with the printer?.. thank u

...ink film breaks and that specific error message is displayed until that last piece of 4x6 is pulled from the paper feed. Clear that out, and all is good.. Change the paper every time u change the

...change the ink cartridge in the Zebra LP 2844 printer? Hi! Here is the manual how to do it. http://www.quad.de/ftp/data/zebra/2844.pdf Good luck to u Nic There's no ink in this printer. It either ...

...film will stick to the tape). You can move the print roller round with your finger quite easily. Then clean with a normal cleaning card. Afterwards check your print start and end position (you may be ...

...film breaks and that specific error message is displayed until that last piece of 4x6 is pulled from the inside top paper feed. Clear that out, and all is good.. Change the paper every time u change ...

film it will solve the problem. But if that tape gets loose it will start doing it again. So you have to change out the tape when you change out the cartridge and make sure enough pressure is applied.

...film along the used ink ribbon on the same area where it isn't printing. I installed a new ink cartridge but no help. Any suggestions? You have answered questions regarding people who have photo ...

...change the ink unless the printer is plugged in. So, if this is the case, go ahead and life the cover of your inkjet so that the cartridges can be removed. Once that?s done, unplug the printer. NOTE: ...