...a nearest Epson Authorized Service Center. --->>> Tirzo Tirzo is right it is a possible hardware issue. Probably the sensor that responsible in CD/DVD guide cover open & close detection might be ...
...marks were worn the sensor wouldnt recognise the disc. so i brought a new cd/dvd tray from epson and it still wont work. could you help me please. use the PrintCD application that came with the ...
...cd/dvd guide. Even though the guide is closed. last week I had to push the guide tight into the printer in order to get it to work, but now it wont start up or work. Everytime I turn it on the error ...
...jam" although there is no paper jam and media is loaded properly. Also if I attempt to print on a CD/DVD the printer feeds it in partially, the printer head goes back and forth a couple of times
Question about Epson Stylus Office Equipment & Supplies
...CD's - the tray kept ejecting with message "not set correctly - reload & press maintenance button" - I then tried to print on paper but the paper fed in & then I got message "paper jam etc. Tried all ...
Question about Epson Stylus Office Equipment & Supplies
...CD tray is in the Closed position. All my cartridges are nearly full. This is my second replacement already. Epson is losing my trust quickly. Any ideas what might be causing this problem? I've had ...
...and it still wont feed properly it will make an attempt then it just starts to jam. I can print on CD/DVDs fine but it wont feed paper. PLEASE HELP!! First of all turn the printer off & disconnect ...
...CD/DVD printing tray but not to worry... Basically there's a sensor on the printer which tells the printer (and software) that the CD/DVD tray is in the open position.. Check to see if the tray is up ...
...cd/dvd tray all the time. i contacted epson about this and they said if the 4 white marks on the tray were damaged in any way the sensor wont recognise it. i ordered a new tray and it does the same. ...
Question about Epson Stylus Office Equipment & Supplies
sensor switch in the CD/DVD tray to let the printer know if it is open or closed. If it breaks off, then the printer always thinks the tray is open. If it's broken off, you will have to either stick a
788 questions posted
Usually answered in minutes!
1,911 Questions
510 Questions
454 Questions
438 Questions
438 Questions