...roll of paper has been put on the spool. This printer is very finicky about paper loading. I see this error most commonly when using auto-cut roll paper. If the paper edge is not cut perfectly ...
...roll paper you are not using with the roll paper belt when two roll paper spindles are installed. See Using the roll paper belt. Before loading paper and guiding it through the paper insertion slot, ...
Question about Epson Stylus Office Equipment & Supplies
Paper as media type unless page setup is manual/roll. I want to use the sheet feeder nor manual/roll which, according to Epson, is the appropriate way to load Velvet Fine Art Paper (sheets). But, if I
...paper feeder 2.put off spring 3. Then find out a white roll gide and open it. 4. Open roll gide from the printer. Then open black roll from white case. In the hole a spring apear . put off the spring ...
...Paper error. When I set everything up on my mac, I make sure that it says roll everywhere I know. I tried reloading numerous times. I have restarted.What I am printing does isn't close to the end of ...
Question about Epson Stylus Office Equipment & Supplies
...Roll Paper buttons, press POWER button, You will see blinking Error led. Release all buttons. In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all ...
...Roll Paper button cuts, feeds and returns paper to the printing position when the automatic cutter is used. When held down for three seconds, it reverses the roll paper out of the printer. The cutter ...
Question about Epson Stylus Office Equipment & Supplies
paper doesn't always feed, and when it does, the paper rolls through without printing On Epson Stylsu Photo R1800, paper doesn't always feed, and when it does feed, the paper rolls through without ...
Question about Epson Stylus Office Equipment & Supplies
...roll paper; same result. What is the problem? How do we get this print on this paper???? On the machines control panel set to sheet fed (pressing the left button will change from Sheet, roll and roll ...
...paper debris stuck to the underside of the print head. While you are printing, pull the lead from the back of the printer leaving the head free floating and unlocked so you can slide it back & fore. ...
393 questions posted
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
454 Questions
438 Questions