Question about Epson Stylus Office Equipment & Supplies
...unit is a complete scanner harware failure or the scanner lock. With the unit on lock the transport lock and unlock it a few times quite forcibly. Then leave it in the unlocked position and power off ...
...scanner unit is unlocked. Slide the lock to the Unlock position (See image below)If unit is in unlock position, you may need to try to encourage the scanner head to go further to the left by tipping ...
Question about Epson Stylus Office Equipment & Supplies
scanner unit from the top. Undo the four retaining screws from the casing under the scanner unit and remove the printers outer casing. you can then see the waste pads. Remove the pads (the good bit,be
...scanner transportation lock? on the unit where you actually place the document or on the glass area on the very right hand or left hand side do you have a switch that has a scanner logo or picture? ...
...scanner unit if there is any. It has to be in the unlock position. Turn the printer back on. If your unit is not yet a year old, please contact epson for your warranty options. To help you find an ...
unit dont worry since it is still under warranty. You can always have the store or the manufacturer replace it. Also, as long as you put the scanner on a stable and level base then there should not be
Question about Epson Stylus Office Equipment & Supplies
...scanner bed from the unit spo I can check out the scanner bar and gears. Unit is out of warranty. I had a similar problem, the scanner bar was stuck to the far left side. Here's how I fixed it: ...
...Scanner unit open -- > close the scanner unit Solution: Carefully close the scanner and press it down until it clicks securely into place. Error Message: Scanner error -- > See your documentation and ...
...If it still sticks then there is another physical problem which may mean the scanner unit needs replacing. you can get a service manual to help you dismantle it from ...
...unit off, lift the scanner cover, and look on the left-side for a toggle switch with the familiar lock/unlock symbols. Change the switch to unlock, turn the unit back on, and test for proper ...
504 questions posted
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
438 Questions
438 Questions
