Question about Eureka Vacuums
remove the wheels and axle. Remove the hair and threads that was causing the wheel to lock up. You will need to use a box cutter or similar to remove the debris. Add a couple of drops of light machine
Wheels (rear) How do I remove them? Need to remove rear wheel and replace them. How do I remove them? you might be better off taking it to sears. taking the rear wheels off may do more damage then ...
trying to replace wheel,,how do I remove wheel you need to pry the hub cap of wheel off to replace it. order the wheel with the hub caps. they may brake in the process of removing it.
remove the wheels? The base unit no longer locks in place when upright. I need to remove the wheels but can't see how. There is a grey cap that has a cutout on one side. use a screw driver in that cut
Question about Vacuums
How to remove the wheel on the belt side of a BISSELL Proheat Revolution 2X deep cleaner We are having trouble replacing the big flat belt, and think we could do it much easier if we remove the wheel.
...little prongs that hold the wheel on. New wheels are inexpensive if it needs to be replaced. Break the prongs off with a skinny screwdriver to remove the wheel. The new wheel will just snap in
...of the nilfisk a300 replacement wheels its a pull off clip on type design the axle should be metal it will need some force to remove the old wheel may even try to break the old wheel off in ...
Remove both back wheels (just pull gently with a screwdriver), then with a big screwdriver pull the cover while pulling plastic locks in the side holes (under the wheels) whith a small screwdriver. ok
Change front wheel on x300 How to remove front wheel to replace on nilfisk extreme x300 The front wheel on a Nilfisk Extreme 300 is changed by removing the 3 screws inside the bag chamber. From memory
106 questions posted
Usually answered in minutes!
1,132 Questions
870 Questions
836 Questions
655 Questions
597 Questions