...Projector has no power. Worked fine, replaced bulb, plugged it back in, no power. Plug works and power cord is plugged in securely. No lights nothing. Thanks. me too anyone find a fix? wow i have the ...
projector fails to start. If any suggestion is available please let me no to fix the problem. Have you tried plugging it into different electrical outlets? Also, are you using an extension cord and/or
Question about InFocus Office Equipment & Supplies
...longer available. Projector Doctor would fix it for $395, but there is a person on this board who goes by Neo32 on here and gtitubro on ebay that fixed it for me for $150. I'm a satisfied customer
projector will only power on after removing and then immediately replacing the power cord before pressing the power button. Also, I found that if it has not been connected to a power source for a long
projector has no power Please check out fixmyprojector.com this unit most likely has internal issues that are not designed for consumers to fix. if you have no leds lit, the power supply could be bad.
Question about Hitachi Office Equipment & Supplies
...fix this? my projector is Hitachi cpx1 XGA 3LCD and it has failed to display. the power and temp lights are red but the lanp light shows nothing. Call hitachi service center to fix it. It may have a ...
...the connection is lost. Another possibility is that the power supply has gone bad. Using another cord would not cause this. I can fix the projector if you'd like. My ebay screenname is
...Projector runs for about 30 seconds then shuts off - had this happen before and unplugging seemed to fix now that doesnt work either. The capacitors on the power supply need to be replaced. When you ...
Question about Sanyo Office Equipment & Supplies
...projector; this solution proved to be the fix I needed. I was able to get the lamps to warm up and get into the menu to cut back the bulbs/power consumption on start-up, allowing the projector to ...
Question about InFocus Office Equipment & Supplies
...The projector however does not respond to any button presses and will not turn on. Any ideas of what happened or how to fix? Thanks! I was wondering if you have found what was the
4 questions posted
Usually answered in minutes!
230 Questions
141 Questions
104 Questions
82 Questions
96 Questions