Dyson DC14 All floors Bagless Upright Cyclonic Vacuum "off switch" Questions

off switch 5 + times, the full bag light goes out and the vacuum starts running again. I have had several of these vacuums with the full bag sensors and I have never run into a problem with the system

Off switch will not turn Off...Switch seems to work O.K. when pressed directly but not with handle switch...It will turn on but not off..Cam seems to be intact on switch actuator..How does switch come

...off switch we have two of these vacuums at work, and both of there on/off switches dont work too well. its hard to explain, but when u normally turn it on or off theres a little resistance in the ...

...off switch...it appears as if it is stuck...there is no click of the on off switch to indicate switching on/off. power source OK. The on/off switch is first to be examined. Let an accredited ...

...off switch is inoperative Took HEPTA Filter off & saw one screw near on-off switch. The screw may be from underside of body where switch is and may be the reason for inoperative switch. Or switch is ...

...off switch won't turn machine off I have a DC07 that runs great except that the on/off switch doesn't work. Unplugging from the wall just to turn the machine off every time is getting old. I'm ...

Off switch on the handle does not properly engage the power switch deeper in the handle assembly. It appears to ride over the lower switch and doesn't engage it to operate it. If I play with it, I can

...off switch. How do I replace it? Take the two screw off the handle and then remove the upper handle devise. This will expose the real on/off switch which is on the top of the unit. There is a plastic ...

...off, when the switch is placed in the off position. The power switch can be moved between the on and off position, but will not shut the vacuum off. Either the switch has a contact inside, or the ...

...off switch it starts, but it won't stay on unless I hold down the on/off switch. Sounds like you would have to get the on/off switch replaced. You could try one thing prior to trying to replace the ...