Dyson DC14 All floors Bagless Upright Cyclonic Vacuum "clean brush" Questions

...brush may look perfectly clean but what happens is that hair gets stuck under spinning cap and, like a slowly growing washer, it pushes the whole brush toward the gear box. When it gets pushed over ...

...clean and it... It says to clean brushes and they are clean and it keeps making a clicking sound. Only 4 months old. You need to remove the brush tray and clean all the parts behind the brush

clean the brushes. I have cleaned the brushes and when I turn the roomba back on it keeps clicking underneath the roomba. I'm not sure what else to do. I had the identical problem. I cleaned the brush

...brush doesnt spin. Belt good, roller is clean, can I check voltage when the head is off? Continuity measures? A broken drive belt, damaged brush roll, jammed brush roll bearings, tripped brush roll ...

...brush bearings Clean Roomba's brush bearings with cleaning tool When cleaning the brushes and usual stuff doesn't work (e.g., you still get Error 2 just a few minutes after cleaning it out), ...

...clean the brush area after using my Pro Heat? The brush or brushes (depending on your model) can be removed if needed. Routine cleaning should just require removing hair and debris from the brushes ...

"Please clean Roombas brushes" I have a roomba 530. It is making a clicking noise, and runs for about two minutes then stops stating, "Please Clean Roombas Brushes." This occurs even after the brushes

clean and the brush assembly rotates easly... onced the brush assembly is removed. What I did notice is the female driver slot (found in the main assembly unit) that drives the brushes seems stuck..Is

...Clean the yellow brush bearings. Then run the Roomba without the dustbin, so that you can watch the brush while the unit is cleaning. Is it turning? If not, call customer support. 877-855-8593. Have ...

...that makes the brushes spin are broken. take it into a shop dont fool with a roomba did you clean brushes? start by cleaning the brushes and don't forget to clean the pin under the side small ...