Dyson DC14 All floors Bagless Upright Cyclonic Vacuum "bad suction" Questions

Ad

Question about Dyson Vacuums

1 Answer

BAD SUCTION WHEN USING ATTACHMENTS Bad suction often means a blockage somewhere, so check all the possible areas for blockage that relate to the hose. Also, check the hose for splits, as they often ...

Ad

bad suction on bissell powerforce bagless vacuum The attachment hose seems to have plenty of suction but when I actually vacuum rugs, the suction is really poor. It feels like all it is doing is ...

Ad

Question about Dyson Vacuums

1 Answer

BAD SUCTION WITH ATTACHMENTS The suction seems to be getting worse when i use attachments You may have a small leak in the hose somewhere, that may be getting bigger, thus losing more suction.

bad bearing. Loss of suction would occur if the fan is loose or damaged. If the bearing is bad but the fan intact you will still lose suction as the motor will not run properly out of balance. Take it

...burning unplug until problem is found and fixed, suspect if no suction hose is blocked and if brush wheel it or the belt may be causing the smell, a bad or failing motor is less likely but

suction is very bad changed bag cleaned roller still bad what should i do next Replace the belt if it is over a few months old. Even if the suction is great it won't pick up dirt very well if the belt

Question about Electrolux Vacuums

1 Answer

...suction, there are only a couple of things that could cause it. As you have checked for blockage, and changed your filters, you may have a vacuum motor with bad bearings, or broken fan blades ...

...suction usually means a clog somewhere or bad filters. The hose and/or the dirt inlet by the brush roll may be coulded. The belt may have stretched enough to not turn the brush roll under load and ...

Question about Dyson Vacuums

1 Answer

...bad suction" examples I have seen. I do know that after I clean my DC07, I have to make sure that the adapter pieces are seated properly, otherwise there's an air gap. Have you tried connecting the ...

...issue. Any idea? There must be a clog in either the hose, dirt inland by the brush roll, or bad filters. If you have suction at the end of the hose, then look lower all the way to the brush

Not finding what you are looking for?
Dyson DC14 All floors Bagless Upright Cyclonic Vacuum Logo

288 questions posted

Ask a Question

Usually answered in minutes!

Top Dyson Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...