Dyson DC07 Bagless Upright Cyclonic Vacuum "loss suction position" Questions

loss of suction on my Nano Lite by making sure the hose was in the locked position (top of unit where hose does not come off for attachments, look for locked and unlocked symbols - make sure in locked

loss of suction when using upright. Suction remains for samll tools no suction when in upright position makes funny noise but ok when not used in that position kindest regards louis u can remove the ...

loss of suction Suction through the wand is very good but in the upright position the suction is very poor. I have checked for blockages and there are none. It seems to me that when the machine is ...

...loss suction on my Hoover Wind tunnel unless the handle is held nearly parallel to the ground. Both belts are good and the roller is free of hair and other debris. What could be the problem? Move the ...

suction loss on dyson animal wrote previously about suction loss, with no apparent plugging of hose/tubing areas, was asked about noise that accompanied problem... there is no noise except regular ...

...suction loss. To check this, remove the dirty water solution tank from the machine completely. Step on the handle release pedal to lower the handle part to the ground. Look at the lower part of the ...

...loss of suction on the vacuum cleaner. If you have further questions, please visit the link below where you may download the instruction manual. There are some trouble shooting guides at the back of ...

...loss of suction. Hi William, it's Jack at Dyson. I'm sorry to hear you're having difficulty with your DC41. From what you've described, it does sound like their may be a blockage in the wand, hose or ...

...loss of suction - cannot see blockage anywhere. Thanks for your help. If you are confident there are no blockages, look underneath, where the brush is, and you will see a short length of reinforced ...

...loss of suction in upright position, from mrs richmond Check the following items: * The bag and connection - change it if it's full * Turn the vacuum over and inspect the beater bar area for any ...