cant put handle back on took a part to clean stairs cant get back together Sometimes the hose that slides on the inside of the handle is coming undone. You will need a new hose.
put back together the top of my Dyson DC17 animal upright? its the trigger to empty the drum? It seems I have to line up the rod with the bottom but I cant see what I am doing! Hi Julie,With the clear
...put it back in. it will seal it and stop. The noise is caused by the air blowing out of the motor leaking out between the rubber gasket of the filter and the motor housing. Smearing a very thin film ...
...cant see anything coin etc put hose back on machine & switch on there should be good suction from the flexi hose, Now with machine still switched on push alloy pipe back on if the hose suddenly pulls ...
cant lock vacuum dyson dc07 will not lock into upright position Firstly, dunno where Sparchitech gets his info about Dyson replacing vacuum cleaners rather than fixing them from but it's untrue lol - ...
...Put the brush ends back on the brush. I then spun the brush to check that it moved freely. It should move freely, if it does fit it back on the machine and it should be silent. If you cant get it to ...
...put the head of the hoover down to hoover, I can use the rest of it fine (less suctions though) I have no manual with this as I bought it second hand so dont know what I can and cant try. Any ideas ...
...cant get the brushes to spin when cleaning carpets. How do i take the cover off to check if the turbine is bad? how do i get a new turbine to fix the problem ? Greetings from GoVacuum, The Hoover ...
1,413 questions posted
Usually answered in minutes!
870 Questions
836 Questions
655 Questions
597 Questions
450 Questions
