Dyson DC07 Bagless Upright Cyclonic Vacuum "belt missing teeth" Questions

Ad

...belt that has teeth on it it on the opisite side of the tank , we put it on but its not turning is there something i can look at to see if something is missing? The motor pulley opposite your roller ...

Ad

...wrapped around the drive spool. Make sure you unplug it before starting and it might be quite hot. the belt stretches and becomes loose or missing some teeth replace the belt. ...

Ad

Question about Dyson Vacuums

2 Answers

...anytime after this will/may produce a grinding noise. If you examine your belt and see teeth missing, replace the belt (and they should be under $20 for sure) and that should repair such an

Question about Kenmore Vacuums

1 Answer

...will cause the cap to go "off-centre" and the roller will vibrate badly. If this is the case, you will have to replace the roller. If the belt is a geared drive, check the belt for any missing

Question about Dyson Vacuums

1 Answer

...if it makes a noise. Check the belt to see if there is any teeth missing off the belt or brush, then start the motor up without the belt or brush on that will tell you if it's the motor or

...missing several teeth. Obtained new roller brush, and want to install; but unsure how to remove damaged roller and install new part. Belt appears too tight. Seems there should be some way to either ...

...missing on the belt.It could also be a bad brush or bad motor but less likley.Take the cover off of the power nozzle and inspect the belt.Disconnect it and look at it for missing teelh or a bad spot ...

Question about Hoover Vacuums

1 Answer

...missing teeth simply replace that belt and you're back in business. If it is not the reset and it is not the belt, some of those machines had bad switches in the handle. You will find that there is a ...

Question about Dyson Vacuums

1 Answer

missing some teeth. Your belt drive gear is probably spinning and squealing each time it hits this bald spot on the belt. To access the drive belt unplug the unit, then just rotate the flathead screws

...belt to inspect if it has teeth , look for cracks or missing teeth. rotate the motor drive with your fingers. it should spin freely . If it is tight or grinds or scratchs you need to have it serviced ...

Not finding what you are looking for?
Dyson DC07 Bagless Upright Cyclonic Vacuum Logo

1,413 questions posted

Ask a Question

Usually answered in minutes!

Top Dyson Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...