Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum "smell belt" Questions

Ad

Question about Hoover Vacuums

2 Answers

...smell- 1. The belt is too stretched out and needs to be replaced. This causes it to slip when the vacuum is on and will create that type smell. You can avoid stretching and having to replace the belt ...

Ad

Question about Hoover Vacuums

2 Answers

belt because of how the smell is you might want to stop using it because the smell comes from the burning and over heated belt my solution would be to get a new belt and that should fix it if you need

Ad

...smell. You need to change your belt. You can find a replacement belt and instructions here: Rainbow Replacement Belts Sounds like your belt Did you forget to put the separator back on? (If it is the ...

...4 years but hardly used it? The smell is probably from the belt. When they are worn and stretched they can start to smell. You can get replacement belts for your model here: Oreck XL7 Replacement ...

Question about Dyson Vacuums

1 Answer

...stale smell when used. Have washed filter and cleaned tubes and brushes but no better You need to replace the belts. When they are worn they put off a smell. Here is the belt you need: Dyson DC14 ...

Question about Hoover Vacuums

1 Answer

...smell hot, then the belt broke. The belt didn't even look worn out at all. It sort of looks like it got stuck and melted in one spot. My belt was a 38523-033, but I couldn't find that one. The store ...

Question about Vacuums

1 Answer

...A rubber smell usually indicates a belt slipping. Rubber belts stretch after a short while and will slip on the brush roll under load. Check also to make sure that the brush roll is turning

Question about Kenmore Vacuums

1 Answer

...smell it could be motor or wiring problems which are best handled by a professional. If it smells like burning rubber it is probably the belt. If it smells like burnt wood it could be the belt ...

Question about Eureka Vacuums

2 Answers

...in the ends that could also cause a smell and belt problem. Ours started smelling too, and it seems that the plastic end on the roller brush was melting. In process of finding rollerbrush for it ...

Question about Hoover Vacuums

3 Answers

smell is from the stretch belt. If It has been two years I'm sure you need to change the belt, that belt should be changed at least every 6 months. You can get the belt for this model here: http://www

Not finding what you are looking for?
Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum Logo

116 questions posted

Ask a Question

Usually answered in minutes!

Top Dyson Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...