broke? and you wish to remove and replace the broken one? well it has to be opened to remove or reconnect the broken wiring. is there screws attaching the removable parts in order to get to the broken
...broke on my model u5064-940 and need to replace it Remove the bottom plate, then use a flat blade, from the bottom edge of the top cover, pry out to release the tabs and the top cover will come off( ...
...broke, and I was wondering how to replace it. Thank you, Rita One of 2 ways, remove the plate on the bottom, the is a clear cover covering the fan. Just unbolt the belt pulley and remove the fan. If ...
...cover over the bag broke, the clips snapped, where can I get a replacement part for it? go to hoover .com and look for the thing that says parts and it will ask u for a model number the model number ...
...broke need instructions to install control push and pull cable Remove the handle assembly by removing screws and sliding off. Remove nozzle housing cover and unscrew fastener at end of cable. Pull ...
...broke go to any hardware or home store even dollar shops --where ever u choose to go buy a replacement/repair plug .this is not a hard repair cut off plug end strip cover back 1 inch and strip back ...
...The hinged cover to the accessory storage area broke off. Both plastic hinges broke. Can it be replaced? Yes, you can purchase a new cover. I can check on the price for you if you would like. ...
...appears to be holding cover on beater bar end. Pop out the two little rollers underneath, at the front. you will find two little screws holding it on. Unfortunately, I found after I broke it
Question about Dyson Vacuums
...Broke the motor cover assy. need to take the cover below off also but when remove the screws it won't pop off. what holds it down. any advice on how to remove this part. Check the manual for ...
233 questions posted
Usually answered in minutes!
1,132 Questions
870 Questions
836 Questions
655 Questions
597 Questions
