Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum "brush not turn belt" Questions

...brush will turn if the belt is touching it, so looknig at it when the brush is not hitting the carpet is not a way to see if the belt still functions. There should be a window where you can see the ...

...Turn the machine over to expose the brush. Look for the red retainer plates, which hold the black brush arms in place. Remove the two Phillips head screws to access the toothed brush belt. Check to ...

...Turn the brush roller backwards 3 compleat turns and the same forward to seat the belt. Replace the base plate and you're done. Dirt Devil Style 4/5 Belt - 2 Pack. Part # 3720310001 - Free Shipping ...

...brush belt you must turn the machine over and remove the brush at the bottom of the machine.there are two screw in the red retainers at each side of the brush, remove the screws and the retainers and ...

watched the motor turn the metal spindle that the belt rests on, and the belt turns as well. The belt is stretched and needs replacement.(Belt # 38528036) . The brush is not turning against resistance

...turn the brush with your fingers. The brush should turn. If not, and I have done this myself before too, the belt may have been caught under the brush and not able to turn at that point. When you get ...

brush does not turn, keeps burning the belts in half. Brush motor works fine. Brush itself seems to be the problem. Seems to have a slight catch when turning by hand. Could this be enough to cause the

brush will not turn. The belt is not The roller brush will not turn. The belt is not broken! Hello, Sometimes the belt can stretch cause the roller to not turn. Also make sure the roller brush is free

...brush can't turn due to excessive hair wrapped around the shaft. If the belt is OK but the brush does not turn, you should smell burning rubber. If the belt is broken, you have to remove the bottom ...

...turn on brush roller ? Is the handle in the down position? Is the motor turned on? Can the brush roller move freely? Is the belt tight? Is there another gear to engage the belt? Is the switch on ...