When I tilt my Dyson DC 17 Animal upright so that I can use the hose, the vacuum powers off. As soon as I tilt it back down, it turns back on. Hi there,I'm sorry to hear you're having ...
...and cause them to stick. you could try filling with vinegar and let set, also tilt it so vinegar runs into valve area. you could heat the vinegar and it will run through the trigger valve area. if ...
water pours out from the clean water tank,there is a plastic type pin that the tank sits on and i'm not sure if there was some sort of washer on it that is not there now. Its a Hoover Steam vac, model
...runs but won't move. probably a belt but i am not sure. if it is a belt: what belt would i need and how and where do i replace it? thank you Do you mean the brushes will not spin? the most likely ...
powerhead won't lift when the machine is tilted back, powerhead remains on the floor Hi there, Sorry to hear you're having difficulties with your DC24. If the cleaner head isn't locking in
motor runs but brush don't spin and belt is not broken Two core baseline things to check. Brush won't spin if the handle is all the way forward (this is where the handle mode engages), so tilt it back
My Kenmore 116.25812508 power nozzle motor will not run unless I tilt the handle. I checked the connectivity from the circuit board in the power nozzle base to the telescoping wand with an ohm meter ...
Question about Vacuums
Is there a more efficient way to clean the brush assembly on the max extract dual v other than running the assembly under water? The bristles are loaded with carpet fuzz and remains of doggy doo ...
I have a Dyson DC-17 animal vacuum and the switch for floors will not come on. I am able to vacuum the carpets but am unable to turn off the roller to do floors. Also the hose with the floor ...
1,047 questions posted
Usually answered in minutes!
1,132 Questions
836 Questions
655 Questions
597 Questions
450 Questions