Dyson DC07 Animal Bagless Upright Cyclonic Vacuum "help problems sucking" Questions

...help without inspecting it. To fix it yourself you must inspect it looking for a leak or clog somewhere. Follow the airflow as it starts entering the vacuum until it reaches the motor and try to see ...

...Help !!!!! Problem #1 - My Steamvac is not Sucking! If your Hoover Steamvac was working properly and suddenly it is not sucking any water, nine times out of ten, the culprit is the lid on the lower ...

...help me-Thanks After shut off all steamvacs will leak dirty water that was sucked up back out. There is always some left in the nozzle. If it is a large amount there is clogged filter that isnt ...

...bissle 93Z6 isn't working. I can turn the vacuum cleaner on but only if the brush is engaged? Any helpful suggestions to troubleshooting the problem? I am not sure I understand your question. If

...working" and follow the steps. I recommend saving this as a favorite so you can troubleshoot other problems in the future. ...

...flashes Acts like too much vacuum. Took prefilter out and works fine. Sucks down to the floor. Help. Filter is dry and no obstructions. Take out works fine. Put back in fails. This usually ...

...kenmore, tried and true. hope to have helped! Have a super, and hopefully sucking(ha ha) Sunday sounds like one of two problems 1 it may not be seated properl2 the bearings in the motor are ...

sucking when required to suck water or cleaning chemical from carpet or car seat It sounds like you are having some issues with your Karcher Puzzi 10/1 carpet and upholstery cleaning machine. Here are

...for a few minutes. I have a new bag , so it is not that. I dont know what is wrong. Thanks for your help. Anna It is a kenmore Elegance 360. It is an electrical problem in the handle, if you can or ...

...problems, possibly related. 1) The canister is empty and attached, but there is no suction and nothing is revolving inside - it gets blown back at my feet and spreads the mess around. 2) The upright ...