hard plastic handle end of the hose, help! can the plastic handle wand be disconnected from the hose to remove the clog??? Thank you Hi! Low suction, poor pickup, or no suction may be due to a clog in
...hose back into position. If you are tempted to use a screwdriver (or any hard/sharp object) please be careful not to puncture the hose as this will greatly reduce the suction of your unit. Good
Question about Dyson Vacuums
hard floors the roller is going round but there is no suction I would guess that the line is plugged between the pick-up where it goes to the dirt tank. Lots of time when something big gets sucked in,
...hard to stretch it out-it is impossible to use. Any suggestions? Everything seems to be working normal. Hi. I have repaired Dyson machines for years & have never come accross this. The only way you ...
...object can roll through. If it doesn't roll through, there's a clog. This can often be remove by simply attaching the hose to the exhaust port, placing other end into a garbage bag, and turning the ...
...hard plastic molding on each end that fit into the sides of the vacuum. Make sure you have these on the right way or they will strip out and you have to replace the housing and the brushes. Have you ...
...to take the screws out of the bottom UN screw the hose at the base usually one and see if that is clogged if it is clean it with a long hard object but all the screws back in and turn on should ...
Question about Hoover Vacuums
...get caught in the opening behind the brush. Hard to see, but it only takes some thing like a matchstick size object to become lodged in there and collect a bit of paper or something... ...
...hard to get too, a broom handle or other long object can be passed through the hose to dislodge the debris. Most vacuum cleaners contain more that one suction hose, so make sure to check each one by ...
1,047 questions posted
Usually answered in minutes!
1,132 Questions
836 Questions
655 Questions
597 Questions
450 Questions