...in the off and on position 4. If the problem persists, you may have a defective button stuck in the on position 5. Please do not attempt to disassemble the unit as the risk of electricution is
...button is stuck, I don't know how to fix it - mine has the same problem. Your belt is broken or has come off the pulley. Remove the bottom plate and investigate. If the reset button is stuck, use a ...
...button is stuck, if the reset button is stuck, use a pair of tweezers to pull it back out...... Secondly, your belt can also be broken or has come off the pulley. Remove the bottom plate and ...
Question about Hoover Vacuums
...button is stuck and not operating even after pressing very hard. i am worried it will brake. Please guide. The release button is stuck and even after pressing very hard, not releasing. Hello there! ...
around the button, but it still stuck, so I used a bolt and hammer to hit the button. Good news--the unit now steams. Bad news--it's stuck in the open position and won't stop steaming while plugged in
...(4-5 inches)pressing on rewind button nothing happens....just stuck! This usually means the cord got twisted over itself. Pull it completely out and give slight resistance on cord and rewind it
Question about Shark Vacuums
...button is stuck and I can't change out to a different canister for the dusting attachment Push down on the handle until you hear a snap. This should re lock the lift away. Now try it again. The lock ...
...on top cover , I had someone use mine 1ce and they pressed "seal" with no bag in machine it did exactly that it stuck closed, tight too !! one touch of release button on top cover and it popped ...
Question about Shark Vacuums
button was stuck. We had to disconnect battery to stop. Is the button broke or can I take it somewhere to get repairs. Have removed battery pack to stop vacuum. ON/OFF button stuck. Have reset battery
1,047 questions posted
Usually answered in minutes!
1,132 Questions
836 Questions
655 Questions
597 Questions
450 Questions