Question about Rainbow Vacuums
...button in when you place the canister on the basin may be broken off. Here are a few images of the pin on the water pan... If this pin gets damages or broken, it may not push into the Interlock ...
broken. Jim It may sound like a dumb question, but is the "BRUSH" button depressed? The Bissel Healthy Home vacuum requires that the grey button on the handle next to the red power button be depressed
...broken. Any ideas for a quick fix before I send it in for repairs? Thanks, Please send any responses to; [email protected] A quick temporary fix - parcel tape, or one of those stretchy cord (bungy?) ...
...broken, or the button has a worn detent spring. If you would like, I could send you a switch kit with the rocker, button, and detent spring enclosed for around 20 dollars plus ship. If you want to ...
...broken parts. If it's an electrical switch/button or lever, you need to check and make sure it's clean, and all the contacts to wires are NOT broken or damaged. You may have to replace parts if they ...
...broken. try a flat screw driver up under the foot switch and see if the little button is missing. If the foot switch is not making a click sound when pushing on it the switch is broken. I have found ...
Question about Electrolux Vacuums
...button). The press the outer part to deactivate (pop out!) the inner part. It took me a while to figure this thing out, but I was glad the vacuum wasn't broken. Tie a knot in the cord so it can't ...
Question about Shark Vacuums
...lift away rotator pro. Try pressing the button and wile pushed down sliding your finger off the side to make it snap up. Make sure your pushing all the way down otherwise you have a broken
Question about Kirby Vacuums
...hose that pushes in the switch hole in the front panel. Make sure the arm is not broken off. Then make sure the button is not stuck in or broken. You can push it with a small pbject, screwdriver
heat/ventilation system Airflow direction does not react to heat control push buttons Remove the access to the to the in-dash control, and look for any loose or broken wires or broken actuaters.
1,047 questions posted
Usually answered in minutes!
1,132 Questions
836 Questions
655 Questions
597 Questions
450 Questions
