Brush bar not working have taken it out and cleaned it hi John. you have not said on what model its not working. but if you go to this link and look for your model it might help you out. Brush bar not
...check brush bar light came on I have removed base plate and brush bar. Not turning The belt that turns the brush bar is worn out or broken. Clean the area that the belt rides on and replace the
Question about Dyson Vacuums
brush bar is not turning and there is no suction the model # is dc14 and the serial # is 571-us-a-17581 I have cleaned the brush bar and checked all hoses and it's not stopped up and still ...
...brush bar is probably stretched and worn. Once this happens, you will lose suction. When they get worn they stretch, thus causing it to spin on the bar itself.Just simply replace the belt with a new ...
...bar? It spins just fine but doesn't get into the carpet like it should. Worn bristles are a fact of life for all vacuums with a brush roll. Where I work, we're changing them all the time! I don't ...
...been pulled tight enough to turn the bar. To tighten on many vacuums, simply loosen the screws on each end of the brush, pull toward the front of the power head and hold while tightening the
...brush bar is not turning The serial number is 571-US-A-17581 1) test the belt for broken or worn, and replace2) test the motor for brush, lubrication, dirty, 3) pulley worn and replace.4) brush bar ...
Question about Vacuums
...brush bar are very worn. Is it possible to get a new brush bar for this model? s/n:FH1-US-EGB4680A Hi, yes it is. I can get a new brush roll for you. Call my retail store at 260 244-3447. Gary, That ...
...replace3) test the motor for worn brushes, lubrication, bearing repair4) test for bar worn or defective repair or replace5) hose is clogged, repair bag/tank full, need emptied.God bless ...
1,047 questions posted
Usually answered in minutes!
1,132 Questions
836 Questions
655 Questions
597 Questions
450 Questions