Dyson DC07 Animal Bagless Upright Cyclonic Vacuum "broken piece brushes" Questions

...the belt is on properly so that the brush turns in the correct direction. If by chance the belt is broken, now is the time to replace

...Broken Brush Bar Connector The brush bar on my DC25 stopped spinning. I pulled it out and the plastic piece that connects the brush bar to the motor broke into a bunch of pieces. Can I replace just ...

...If there are no obvious air leaks, check to see that the belt that turns the beater brush is not broken and that the beater brush has not frozen up. Remove the beater brush and clean it, spraying

...and I can use other suction pieces, but the brush on the main one doesn't turn. The belt is not broken. likely a belt or broken wire in the power ...

...brush will not stay up. Could this be a broken elevator? I think the elevator (black piece) has fallen into the machine. How do I get into the bottom to get the piece out and repair/replace it? ...

...are usually caused by 1 or 2 if not both of these problems: 1- The drive belt for the brush is broken. 2- The brush itself is frozen due to debris. Remove brush and clean all debris off. Pay ...

the main roller will not work Check for a broken belt that drives the roller. Remove the roller brush and clean as best you can. Add some WD40 at both ends of the roller brush between the brush and ...

...piece which gets inserted into the hole is broken. Does anyone know how to dis-assemble the vacuum. We've unscrewed all the screws, but it doesn't seem to want to come apart. I'd hate to sent it to ...

broken so I managed to replace that. Before putting the cover back on I see the control knob for the roller brush moves a plastic piece left or right to activate/deactivate the brush roller. I don&

...broken to the power brush /head. Did you happen to smell burning rubber or see small pieces of black rubber? Look in your manual for replacing power head/brushes belt! With the unit off , try turning ...