Dyson DC14 Animal Bagless Upright Cyclonic Vacuum "vacuum wont work new" Questions

...wont work New just wont wont work. Geen light comes on but no steam Hi, Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head... Euro-Pro Shark ...

vacuum. I put a new bulb in...still wont work are ther fuses??? yes there is should get a vacuum store to take a look at it. i cleaned the connections on mine and it worked, i think the rollers on the

...wont need a new vacuum at this time. But you will need to try and trace the clog and clear it. I would start with the tube by the roller brush and work my way up from there ! Also check the roller ...

...wont work the vacuum works fine. hand tool brushes work fine too. its just the bottom brushes wont spin. how to remove the hood to check inside? http://www.vacuumcleanershop.com/hvrmdlf7205900.htm#B2 ...

...vacuum cleaner model number Z570. The charger no longer works and replacement is no longer available. The original charger is MEC-B5265. Input: 240v AC-50Hz 6.5W. Output:15.5vDC-180mA. Is there ...

work the belt that drives it wont grip the roll? It's brand new! I followed the instructions,you have to release the handle as though you were vacuuming and it works automaticly you can't put it on ON

...wont clean carpet My vacuum has good suction with the hose, the roller is working, however, it just hardly picks anything up anymore. Is it likely the aggitator brush is just worn down. could be, but ...

...wont spin,I was told the cable for the self propel might be broken but I checked and the propel works.the v belt seems loose but it is new .I am 100% sure the replacement is the same belt that was on ...

wont shutoff anymore is there away to stop the safety thing in the vacuum, because It has a new filter and its clogged a little , show I cleaned it out and it works aging then it stops aging, what can

...wont stay on I have a BRAND NEW just out the box this is the second time we are using it Hoover elite and the belt keeps slipping off the Motor shaft WHY???? The belt is bad. Been sitting too long. ...