Nutone Vacumn 450 built in vacumn system Suction very bad - replaced with new bag - I'm thinking something stuck in hose definately something stuck in the hose. Take the hose of and check for blockage
Question about Neato Vacuums
...SOMETHING IS STUCK IN BRUSH CLEAN ! I CLEANED IT BUT STILL SAY IT STOP, NEATO CLEANER IS SAYING SOMETHING IS STUCK IN THE BRUSHES BUT I CLEANED IT GOOD . The bearings are dirty so heating up and ...
...something stuck in the wand tube and everyting is getting caught on it. There is very little suction from the wand. How do I get the wand apart or somehow get the object stuck out of the tube? Thanks ...
...something stuck in the pipe? We had the exact same issue. Turns out my wife had inadvertantly sucked up a magnet that was the same size ans the tube. Hold the tube up to a light source. If you cannot ...
...something stuck in the hose). Try taking the hose off and turning the vac on. If the indicator doesn't go to full now but does when the hose is on, something is in the hose. Usually it's right in the ...
...something stuck on it. Or, it could be that the bag or canister is full. Then again, maybe something is stuck in one of the intakes. Be careful when checking the beater bars. Unplug the vacuum before ...
...something is stuck in tube. Hello There! I had the same exact problem. Seems something was wrong or stuck in the tubes. Finally, when I kept trying to clean it out, the tube ripped off and I found a ...
...stuck? Yes, something is stuck or the beater bar belt is stretched and you need to replace it. Jim The filter and filter housing could be the issue, check this article out: ...
Something stuck in my FilterQueen Vacuum I have a FilterQueen Vacuum and It stopped picking up so I stuck something up inside the metal tubing and felt something jammed in there..The only problem is I
884 questions posted
Usually answered in minutes!
1,132 Questions
870 Questions
836 Questions
597 Questions
450 Questions