Dyson DC14 Animal Bagless Upright Cyclonic Vacuum "remove brush dc17" Questions

...brush control switch next to the red on/off switch. It's also worth checking that the soleplate is fitted correctly. Any dirt or residue on the soleplate can be removed with a damp cloth - make sure ...

...remove debris around the belt. brush wont spin and i have already pushed the reset button on the bottom plate are 3 spots, one in the center and one at each corner, that need a flat head screw driver ...

...remove the roller brush and change the belt. Here is the belt you need: Dyson DC17 Belt Call Dyson first - it may be under warranty and they send you not only a belt but a new brush system also - we ...

...brush is not turning. I have remove all the material (hair,lint, etc.) wrapped around the brush itself, but it is still making the noise You need to replace the belt. Here is the belt you need and a ...

...the brush roll motor making the noise. Remove the brush roll & belt and turn both motors on. If you do not hear the noise when both motors are running the noise is likely coming from the brush ...

...brush? Can you remove the floor plate cover, over this part of the vacuum, and make sure there is not more yarn wrapped around, out of sight from the outside? If not-- maybe the bearings have been ...

...brush? I have a Dyson DC17, Belt broke. How do I put on a new one? Bob Remove the plate on the bottom front of the vacuum by turning the plastic knobs on the plate with a nickel or screwdriver. Then ...

...brush roller is activated, there is a loud screeching sound. I tried replacing the belt, but that didn't remove the screech. The sound is definitely coming from the motor/clutch assembly under the ...

brush on my Dyson DC17 makes a terrible noise at all times. I removed the cover and extracted all debris from this area, making sure all connections were as secure as possible, but that didn't improve

How do I remove the brush bar motor in a DC17? is it a dyson dc17 or a bissell vac ????????