...wasnt even turned on!! There is a short in your vacuum that is cause your circuit to trip. It is more then likely a ground wire that has come loose in the plug that attaches to the motor of the ...
...plug is only likely to blow if there is an electrical issue inside the machine, so replacing the fuse may just result in the fuse blowing again. If this happens then the vacuum needs proper checking ...
...plug it in it blows. What do you think it could be? Vacuum works with the battery but does not work with 120 volt. Every time I plug it in it blows the internal fuse. I have replaced the fuse inside ...
...vacuum cool down after using it for 40 minutes. made sure power cord was plugged in and no house CB had tripped. Is there an in-line fuse somewhere? The only fuse is in the plug if this blow then it ...
Plug gets hot when using vacuum.Could it be the motor? My husband thinks it's because it is drawing to much power. That the vacuum is blocked somewhere. Do you mean the plug in the wall gets hot if so
plugged in but has no power Try changing the fuse. These machines are bad for blowing fuses.
...13 amp fuse in plug, but still keeps triping the fuse box?what should i try next? I would replace the whole unit itself. It's obviously shorting. What kind of vacuum is it and how
when you plug in vacuum it blows fuse in house fusebox I have the same problem and I don't know what to do? anybody?
Question about Oreck Vacuums
plug in my oreck steam it mop, it keeps blowing the fuse Make sure no other appliance is running at the same time. Some other appliance on the same house line is causing the fuse to overload. Example:
Question about Vacuums
vacuum keeps blowing the fuse. It's about 8 months old and is running good. I looked over it, all wires and plugs are good. A fuse blows when the current in it exceeds rated capacity. Obviously, it is
884 questions posted
Usually answered in minutes!
1,132 Questions
870 Questions
836 Questions
597 Questions
450 Questions
