Dyson DC14 Animal Bagless Upright Cyclonic Vacuum "hose wont work" Questions

...wont work using the hose i have my dyson dc07 wont work using the hose, i have replaced the hose as it was ripped and have cleaned everything but it still has no suction and makes a horrendous noise ...

...hose wont pick up but the rest works. Hi Pam... Sounds like you have a blockage in your hose, remove it and try to see if there is debris in the hose...remove the debris and it should work fine. ...

hose wont pick anything up, there seems theres no suction, and its not taking it to the canister. Any suggestions? Take the Hose out bcack run the water hose thru it full blast to unclog it then leave

vacuum cleaner Motors plural shut off during operation. Paper found to be jamming the suction hoses. Cleaned hoses, checked AC outlet. No motor operation. Period. is the circuit breaker in the vacuum ...

...wont run We have a Hayden 6000. Hose works when plugged in at repair store but does not work when plugged in at home. DC connection on side of unit reads 6v dc. All connection points in house read ...

...wont power on Make sure cord is not damaged. Check to see nothing is blocking hose or carpet nozzle(where beater brush is or brush roll). Plug unit in to a receptacle that you know has power going to ...

...the bottom? It is a matter of Physics. It seems like you have it running when you change the hose. ?? That's a no-no. Basically you will have o take it apart until you know how it works or wont ...

...wont pick up anything ive been havin this vacuum for 3 months and it used to work great after every use i clean out the filters but lately it hasnt been working it picks up little or not any trash at ...

...to be set up right, but the water wont come out from where it is and into the hose that brings it to the cleaner.... use the suction port for the vac hose the water hose hooks to your kitchen ...

...hose is clear and it still wont work,make sure the beater bar is spinning while on.If it is not the belt is broken and will need replacing.To do that remove the plate on the bottom and the beater bar ...