Dyson DC14 Animal Bagless Upright Cyclonic Vacuum "carpet brush moving" Questions

...to carpet. then turn vac on. Brush will only spin when vac is tilted back to operate. brush stops when upright and on to use hand tools so the er is no danger to carpet or persons with moving

hoover carpet cleaner brushes do not move Agility hoover carpet cleaner one year old, brushes do not move for cleaning. did you check to see if the belt came off or its stretched?

...brush on (carpet) or off (floor). When using on carpet, with the brush on, the brush will stop working. At this time I must raise the handle up and back down to get the brush to restart. It repeats ...

...brush roller. To Adjust the height of your vacuum cleaner, put the vacuum cleaner on carpet using the lowest setting and turn it on. Pull the handle back while slowly twisting the knob to raise the ...

...issue. A lot of vacuums have very small motors. These can't be buried into the carpet. The brushed are mentioned to skim the tops of the carpet . Try readjusting the carpet hight on the brush

...the way it lookes. belts can stretch over time and when you put the machine on the carpet the friction causes the brush to stop because the belt has stretched. i would try this first. hope this ...

carpet brush is not spinning? The carpet attachment brush is not spinning. The spin brush button when pressed is illuminated. Suction is fine. The brush is free of debris. But it is not spinning. I am

...from moving the vacuum on my carpet There should be a height adjustment for carpet. Try adjusting it higher If your brush roll is not spinning properly it can make the vacuum hard to move on the ...

...carpet brush does not turn. I cleaned thoroughly per the instructions but the brush does not turn. I tried moving the carpet/bare floors switch with the same results - carpet brush does not spin. The ...

...carpet There is suction. The brush is rolling but the machine seems to stuck on the carpet I could not make it move and roll on the carpet! check to see if there is a button to push to lift the front ...