Dyson DC14 Animal Bagless Upright Cyclonic Vacuum "bar" Questions

beater bar My vacuum with run fine and beater bars turns. then all of a suddend the bar stops. I have cleaned the brush, the brush bar motor everything is clean and free of hair. It goes back on when ...

...is too much suction. See if the following information can help. CARPETS OR HARD FLOORS • The brush bar will always default to 'ON' (spinning) each time you switch the appliance 'ON' and recline it ...

Vax Air Reach bar won't spin I've tried the reset button, but the light is already green, not in the red trip mode. The the beater bar switch on the top of the unit next to the on/off button does turn

...THE BELT ON A DIRT DEVIL VISION VACUUM CLEANER? With the vacuum unplugged, turn the machine beater bar side up. Locate the clips or screws that hold the plate over the beater bar and remove the

Beater bar not turning, but belt is not broken. Remove the beater bar to remove the belt, then put the bar back into the sweeper. Check to see if it is bound up--usually the end bearings are packed ...

I was told by a previous repair man that there is a fuse in the beater bar that needed to be replaced. My beater bar has stopped working and I have tried all the normal causes; reset button, trying ...

I have a Dyson dc15 animal which the beater bar does not work. Motor and switch were tested and work, removed any obstruction from bars and engaged the clutch and still not working. Any suggestions? ...

vacuum turns on and suction in hose works, beater bar won't turn If you hear the motor in the head running and the beater bar isn't rotating, you probably need a drive belt. With the power off, make ...

...CAN U TELL ME WHAT IS WRONG PLEASE AND HOW TO FIX. THANK YOU When the vaccum is upright, the beater bar is not engaged. When you tilt the handle back, the clutch engages and the beater bar begins to ...