...it starts to oveflow and just keep going it won't go to any other cycles just stay at the one i put it on and the water just keeps going? Do you have any idea what is going on/ replace selenoid ...
washing machine kenmore 80 series top load washing machine, ten years old. When clothes were loaded and machine filled with water, it overflowed the top and flooded my floor. It did not go in to the ...
LOAD WONT FINISH KEEPS SAYING DC I HAVE A MAGTAG NEPTUNE WASHER AND IT KEEPS SAYING ON THE SCREEN OF MACHINE DC. I KEEP ADJUSTING LOAD BUT THE LOAD WILL STILL NOT FINISH ITS CYCLE If the clutch fails ...
...keep going unbalanced . It reads UL and the drum bangs around bad shutting the washer off. dont know if this will help but try to me it sounds like an unbalance load view the load and try to ...
...keep blowing the thermal fuse on the blower, we cleaned the line out and it is clear, i replced the fuse again and dryed 3 loads on the 4th load it stopped working again the dryer was very hot it ...
the washer mode light keeps blinking where you choose what wash type you want, the red light keeps blinking and it wont run. this is on the front load whirlpool washer with model number ghw9200lw the ...
Question about Hotpoint Washing Machines
hotpoint w440 washer/dryer keeps repeating cycle load? i was just wondering if anyone else had had the same problem. I put the washing machine on this morning before i went out and when i got back ...
my kenmore elite oasis keeps stopping on spin and flashing ul it is a top loader king size capacity UL = uneven load. Re-distribute clothes and re-try. If still no-go... the load balance sensor is ...
Question about GE Washing Machines
...and spin cycles, but they just keep going on forever. For example, if you drain manually ,it will usualy go into the rinse and spin cycle. But instead of shutting down, it just keeps spinning. ...
fisher&paykel 6.5 top load machine hi. the machine keeps going unblanced all the time even with a little load in it ,it dose spin up then goes out hi check that the machine is level , if they are not ...
125 questions posted
Usually answered in minutes!
58 Questions
29 Questions
