Fujitsu Siemens Celsius R610 PC Desktop "scsi jumper" Questions

configure SCSI hard-drive jumpers Two problems. 1) My Fujitsu Celsius R610 reboots immediately I turn it off via the sceen controls 2) I want to add another SCSI drive but I can't get a clear idea of ...

...scsi), i am able to format the disk but when i try to install a OS it says no hard disk. is it due to jumper settings or due to some other problem What O/S are you installing? You might need to load ...

...scsi boot setting, if it has it. Another chance is that something is wrong with either the cabling or the controller itself. As far as the jumper, that may be the erase bios jumper. Usually though, ...

Scsi drive in and it still doesn't recognise the hard drive. Can anyone help me out please. Thanks in advance. try switching the jumper pins on the hard drive to slave instead of master theirs alot of

with my system or with the hard drive? It is necessary to run the SeaTools, SeaTools Enterprise, or SCSIMax diagnostic before contacting Technical Support 1.800.SEAGATE (1.800.732.4283) on an internal

while booting. After entering select default settings. Save, Exit and Restart. If your problem still persists, then check for jumper settings (usually provide in SCSI disks) are set to read and write

...SCSI drive then get back to me for further instructions. The motherboard normally has two IDE controllers, the first controller will have the C drive (it will be jumpered as master drive) and on the ...

...SCSI (Seagate) and straped them together using the connectors in the PC. The Vista Home premium will find the disc under the device manager but it has no letter assinment and cannot be found in ...

...Jumper settings for Western Digital Serial ATA hard drives are mainly used for enterprise storage environments. Most third party controller cards and RAID adapters are recognized as a SCSI device ...

...jumper http://webserver-1.wescorp.com/wescorp-library/pdf-library/DEC-CPQ-HP/IPB-&-QR-1/app_b_scsi_hard_drive_config_charts.pdf I suppose when this is enabled it waits for the command before starting ...