Gateway 300 C PC Desktop "hook usb cable motherboard" Questions

...hook up r label HDD LED wires red white / labelPWR SW black white / label PWR LED wires blue white . were do they go This is not a photo of your motherboard. Please use it as a general guide on what ...

...usb and speaker jacks do work. I have 2 sets of speakers plugged into the pink 3.5mm jack on the back panel. I have never had a microphone plugged into this computer, I've had the computer new since ...

cable. ONE of the Front USB headers on the motherboard, will be used for the Card Reader. Click on S - USB 2.0 Connectors [NOTE* In EACH USB header are provisions for attaching to TWO USB ports. Front

...hook-up process shouldn't take more than a few minutes. Connect your computer monitor to your Dell computer using the included blue VGA cable. This VGA cable plugs into the blue video input on the ...

...usb hookup but i have a problem hooking them up the cable usb1 + usb1-1 gnd.1 vcc1 usb2+ usb2- gnd2 vcc2 shield my email is [email protected] I can give you the link in the internet for the manual for ...

...cable to another SATA port on the motherboard. It's possible that the DVD drive failed as well; you can try a different optical driver. All of the SATA ports should be able to support a boot device ...

...cable was accidentaly unplugger and I'm not sure where to reattach it to the motherboard. Motherboard installed in computer case, look at the bottom edge of the motherboard. Now I need your ...

hook up this drive that is suppose to be plug and play. I don't see any way of hooking up the cable that comes out of the back of the drive. You're looking for something called a 9-Pin USB

...hook up your second front USB port. If your case has more then 2 front USB ports, and your motherboard has more then one front USB headers, then repeat the above as necessary. Example: If you were ...

...cable connectors to them are different from each other. Front Panel USB connectors; Further to the right are two white connectors. EACH one can support TWO USB ports. One should be for the two USB ...