Gigabyte Slot 1 GA-6BXC Motherboard "red led" Questions

...led red/white wire colours may be different Dear User here is confiruration. 1.Orange with + sign and orange is for HDD LED. 2. Green with +Sign and Green is for Power LED. 3.Red is for Power switch. ...

...case type): Green(+ is the colored wire)-White(-) --> POWER LED (GREEN light)Red-Black -> POWER SWITCHRed-White -> HDD LED (RED light)Blue-White -> RESETRed-Black (4 pins wide)-> ...

led ligth red and gren was on. I turn off the Pc y start again but y had the same situation, Then I open the pc,I finded the fan processor wworkig, the led of the Cd room always was on and flashing at

...ground i think) speaker connection(red and black) reset sw(blue and white)2 power led(white and green)power sw(orange and white)hdd led(red and white) please help where do i connect on the ...

LED to turn Red. Built into the mother board is a small switch. When the system is shut down the MB maintains power to the cmos. If the standby switch fails to function correctly the LED will turn Red

...LED plug is usually red and white with the red being on the positive (+) terminal. The Power LED plug is usually green and white with the green wire going to the positive terminal. The power switch ...

LED - 'RED & WHITE' POWER LED - '+GREEN' '-WHITE' RESET SW - 'RED & BLACK' Can u help me please as ive finished the pc and stuck on this! Many thanks. Dave I am

...LED- green 5 Reset Switch - blue 6 Power switch + red 7 Reset switch + blue 8 Power switch - red 9 Power Out (do not use) 10 No pin NOTE When connecting individual wires from your chassis front panel ...

HOW TO CONNECT AHDD LED IN ASROCK MOTHER BOARD Just parallel to Power LED button you find HDD or IDE LED button, the red coloured wire should be top and the white coloured towards reset connection.

...red led lights up Try a isolation test. Remove MB from case and put on a piece of cardboard, then hook everything back up to it and see if it powers up. You have 2 LED's LED1 Onboard 3VSB LED for ...