Indesit W 123 Front Load Washer "put drive belt loader" Questions

...drive belt & pulley. When fitting the new belt it needs stretching by first putting it around the motor drive shaft & easing on to the main pulley whilst gradually rotatng the pulley. You need to ...

won't agitate how do I fix a drive belt to a top loader washine machine take out plug open at rear and you will see where to put the belt

put a magnet on the lid switch and helped start it spinning by hand and it is maintaining the spin cycle. It agitates fine fills and empties ok but wont overcome the load to start spinning. Is there a

...put the belt on.There may be something that's missing here, though. And that is... "Why'd the belt come off in the first place?" The motor pulley and the drive pulley should be lined up EXACTLY. If ...

...drive belt. Samsung Front loader . Hi from retired Englishman in SW France, That's a good indication as the drain motor is independant of the main motor and belt. Quick way to see/confirm- REMOVE ...

...put the belt on and then slide the motor towards the rear to tighten it.. then tighten the four bolts. They may simply have not tightened the bolts on the motor from factory and the motor slid back ...

put out an error code during the cycle, it sounds like your drive belt may have come off the motor / drum pulley. You should be able to access it by removing the back panel. Be careful- and unplug the

drive washer it could be that the belt has broken or come off. I am taking a chance now by sending you my 'standard front loading belt/motor problem' document JUST in case ;-0) -----------------------

put wachine powder in fills up with water and doesn't drain. Any advice is welcome, thank-you putting drive belt back on which has come off We have a Siemens A 08-16 front loader waching machine which

belt. If it is a front loader open the loading door, put one hand just inside the tub at the top (like a waiter carring a tray shoulder high with one hand) and LIGHTLY push upwards then drop your hand