Indesit W 123 Front Load Washer "power connection stuck" Questions

Ad

Question about Hotpoint Washing Machines

1 Answer

...means 'heater relay (possibly) stuck'. 'Check power supply connections to the heater, wiring and module (i.e. PCB) connections' (apparently poor PCB connections are often the cause) Good luck, John ...

Ad

Question about Maytag Washing Machines

1 Answer

needs to be replaced. Is there a way to reset it? Thanks a lot! The magnetic switch was stuck due to power outage / contactor are spark connect the contactor stuck together .Magnetic switch to replace

Ad

Question about Hotpoint Washing Machines

1 Answer

...means 'heater relay (possibly) stuck'. 'Check power supply connections to the heater, wiring and module (i.e. PCB) connections' (apparently poor PCB connections are often the cause) Good luck, John ...

Question about Washing Machines

1 Answer

stuck.Remove plug and wait 5 mins {MACHINE MAY NEED TO DISCHARGE POWER BOARD} THEN CHECK heater connections and main powerboard connections. heater is located at back of machine and powerboard at back

Question about Maytag Washing Machines

1 Answer

power connection from the pump. Disconnect the drainlines after removing as much water possible from the drum as the water will come out of these liines when you remove them. Remove the pump, open the

...power. Continue to hold for 10 seconds and release. Aha, I just found this, and I was right. LG washer stuck on load sensing To reset this issue, the manufacturer advises to unplug the machine, press ...

Question about Indesit Washing Machines

1 Answer

are connected with a plastic covered electrical connector is plugged in is making a clicking sound. What is my problem? Disconnect power. Remove the drain motor and check for debris stuck in the motor

Question about Hotpoint Washing Machines

1 Answer

...other buttons to work what do i need to do? f12 is an electrical connection problem between the 2 circuit boards of the machine. it may be a loose connection or more likely a new power board

Question about Hotpoint Washing Machines

1 Answer

...and on but still saying f-12 can you help? f12 is an electrical connection problem between the 2 circuit boards of the machine. it may be a loose connection or more likely a new power board

Question about Whirlpool Washing Machines

2 Answers

...stuck open or simply defective. Turn off the water, turn off the power, remove the hoses and check the inlet valve. The valve could be stuck, have something in it. You may need to remove the inlet ...

Not finding what you are looking for?
Indesit W 123 Front Load Washer Logo

1,189 questions posted

Ask a Question

Usually answered in minutes!

Top Indesit Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you an Indesit Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...