IBM ThinkPad T41 Notebook "connecting boot devices adapters" Questions

thinkpad x40 cannot see the wireless adapter My wireless wasn't connecting. I decided to remove the connection. When I went to add it back to the machine - aka add hardware, it doesn't find the ...

hi. i have an ibm t40 running wit winxp sp2. i can't connect to internet with my ethernet card. i have an error that shows "intel pro 100 network connection" is either damaged or absent. But i know ...

HARD DRIVE If your ThinkPad does not boot up or you get this error message - The error PXE-E61: Media test failure usually means the hard diskhas failed or the hard disk needs re-seating or the disk ...

wireless configure laptop Hello I have a netgear wireless broadband router. I am trying to connect wirelessly with the above laptop. I have typed in the correct SSID! number and Network code. When I ...

...connecting it to a working computer's USB port. IBM states that if you don't know the Power On password, therefore you cannot get into the BIOS to remove the password, and you need to replace the ...

...adapters, select your wifi adapter, right click then uninstall it. If you're with Vista, do not delete the drivers. Then when its gone, select action on device manager and scan for hardware changes. ...

...connecting to an staying connected to by home wireless network, the button on the from does not allow wireless to be enabled? Help Hi, Click on start>control panel>network and internet ...

...Adapters to it expands. Right click on the display adapter and select uninstall. Restart the computer and let it boot in normal mode. If it boots in normal mode let it detect the Display and install ...

toshiba satellite wont connect to internet. Wireless network adapter showing vista error code 31. Any ideas Try removing the wireless adapter in the device manager and then re-boot computer. Vista ...

dell inspiron 2200 will not power on Check your AC adapter for an LED showing it is getting power from the wall. Make sure you have no external devices connected, then try booting with just the AC ...