IBM ThinkPad R52 Notebook "boot command prompt" Questions

...chkdsk /r , and then press ENTER.  6.At the command prompt, type exit , and then press ENTER to restart your computer.  This takes a bit longer, but the system should boot back into

command prompt, type the appropriate commands to diagnose and repair your Windows XP installation. From here I would try "chkdsk /r" and "fixboot" For a list of commands that are available in Recovery

boot sequence from BIOS. (If the installation CD that you have is a bootable CD) Hope this helps. Thanks & Good luck! You can get dos prompt even on windows XP. just click start-Run.enter cmd.exe. you

...command prompt to format the hard drive. Just boot up with the CD as the first boot device. Press F12 just after you switch on the laptop, then select the CD as the temporary boot device, insert the ...

...boot in safe mode with command prompt 2. when it starts, enter the command chkdsk (that means check disk) 3. accept all the changes done by running the command above and restart your laptop 4. ...

...boot from it.  You want to get to the Dos Command Prompt (Black screen with white letters) and type the following command: chkdsk /r Check disk will run well over an hour or two and you will ...

boot off the linux USB or CD 3. Mount the Windows NTFS partition 4. Rename C:\WINDOWS\System32\sethc.exe to C:\WINDOWS\System32\sethc_old.exe 5. Copy C:\WINDOWS\System32\cmd.exe to C:\WINDOWS\System32

...Command Prompt Enable Boot LoggingEnable VGA modeLast Known Good Configuration (your most recent settings that worked)Directory Services Restore Mode (Windows domain controllers only)Debugging Mode ...

...Command PromptEnable Boot LoggingEnable VGA modeLast Known Good Configuration (your most recent settings that worked)Directory Services Restore Mode (Windows domain controllers only)Debugging ...