IBM ThinkPad R50e Notebook "set bios" Questions

...or clear" It is on 1-2 position right now set it in 2-3 position then power up then all bios settings are reset. then again set it in 1-2 its original position. DEAR SIR HOW TO IBM BIOS PASS WORD ...

...bios and set the time and date there. you also may need to load the default settings to reset the bios to remove any bios passwords. if that does not work remove the bios battery or move the bios ...

...set a power on password in bios but now I want to tuen it off. I get into bios but the ower on icon stays locked. how do I remove the password? Thanks go to www.ibm.com go to support page, download ...

...on where else I should look to resolve the issue. Also upgraded the BIOS but there are no fan settings there.The fan use to work and suddenly stopped, this is why I replaced the fan. hi this is ...

...BIOS has been set with a password and you cannot enter and change the BIOS settings without this password. Replace the BIOS battery with a new one, then boot up and enter your BIOS password, then ...

...bios password is the one you set up. They do not come with a password. The only this happened, is if someone stole it, or you got is used. Contact the old owner. An everyday issue so we banked on ...

...BIOS enviroment to set the setting? have try using the F1 botton still showing the error message and have also clear the cmos setting. pls how be waiting for your good response. You need to replace ...

...bios . Then enable usb 2.0 legacy enabled.Also set first boot device in boot option as your cd-rom then save settings then check. Do the following steps:- 1.Power on your laptop. 2.Enter your BIOS ...

...error. error 163 usually BIOS clock not updating. Replace this battery and go into the BIOS setting and configure the date/time settings, and hardware settings (if you are not sure select the ...

new one, wait for 1/2 hour before inserting the new battery (this will clear the BIOS and set it back to the default settings). Then go into the BIOS configuration and set the Date & Time settings etc