Question about IBM ThinkPad Computers & Internet
...battery is good and your motherboard is good as well. if you leave it off and then turn the laptop on and that error message comes back then you need to change out the motherboard. just reverse the ...
Question about IBM ThinkPad Computers & Internet
...battery, then it's possible that your motherboard has died (if it was the HD you would at least get the BIOS screen before it stopped). I suggest you take it in to a qualified repair center & ask ...
...battery AND try Check ram hdd and power syply if still have a problem : just buy new motherboard I am having the same problem and i dunno wat 2 do Check connection near Video invertor board and ...
...working than if so than yes get a new battery. and the battery should stay in the laptop to help keep the cmos battery on the motherboard charged ok? hope that this is helpful for you best regards ...
battery or bad motherboard? I'm a lab coordinator at an elementary school. We have 64 dell D510 latitude laptops. They are four years old and now out of warranty. The batteries started dying, I couldn
Question about IBM ThinkPad Computers & Internet
keeps freezing up on me....I can't always boot up when I want to. When I do boot up and it's working, everything is fine, then I click on something and she freezes up. I used my original disc to put a
keeps dying - have had it in for repair four times within the last three months - works for a week or so and then i get a black screen - and in upper left corner is a blinking hyphen - the 'repairers'
engaged due to a malfunction this could cause the problem. Start by trying a new battery. If a new battery doesn't cure it, then the problem may lie with the power management system on the motherboard
battery cable into the motherboard. Slide the battery partially under the laptop casing to hold it in place, then align the cover with the slots on the bottom of the laptop housing. Replace the screws
Question about Computers & Internet
...battery inside that keeps that circuit alive for clock and PRAM settings... don't want to short that circuit out. Work only on one pin/strip at a time. Hope this is the problem. Because if it is the ...
211 questions posted
Usually answered in minutes!
790 Questions
782 Questions
445 Questions
428 Questions
400 Questions