IBM ThinkPad 600E 2645 Notebook "ps 1" Questions

how to turn on the wifi on Lenovo R60 1. There is a switch on the front left hand side of the laptop, just shift that to the right and will turn the wireless adapter on. 2. There is also a shortcut ...

...an 1 slot PCMCIA. I'm sure there's cheaper one out there but with a quick search , this one came up. good luck. This is hardline ethernet connector (not wireless). ps. might want to upgrade your OS

PS: BIOS reset problems on laptops are sometimes due to power problems caused by battery packs going bad; check your battery pack, too, and see if it is working okay. Good luck... Necesito de urgencia

...1 : My laptop has 2 WinXP systems, two different languages. One winXP is build-in already installed in my laptop. However, 2 systems make my laptop run so slowly, I deleted all function of the add-on ...

...1)a) in power-on mode, open/unplug the data/vga cable of the monitor from cabinet..see if raster or 'osd' is appearing on the monitor screen..if so monitor is ok..else replace the monitor and ...

...ps-on, violet~pg& grey~sb); -12v (blue);-5v(white); +3.3v(orange)..the 'oscillator and error amplifier ic',or pwm switching regulator circuit..look for defective protector-transformer/resistance ...

...ps-on, violet~pg& grey~sb); -12v (blue);-5v(white); +3.3v(orange)..the 'oscillator and error amplifier ic',or pwm switching regulator circuit..look for defective protector-transformer/resistance ...

...ps 1 My ibm ps/1 2121 does not turn on, I can hear the fan go once and stops. Nothing shows up on the screen and it won't light up. Is it the monitor, or the computer? The monitor does not light ...

...1 through 4 again. For the Wireless Notebook mouse: This issue can occur if the micro-switch on the bottom of the mouse is not released. Use a pin or a pen to try to release the button if it ...

...1. Turn on your computer. Press F2 when Dell logo comes up. It will open the bios setup program. 2. Now, press Alt-p three times to get to page number 4. Near the middle of the screen you should see ...