Smeg SE280X Stainless Steel Electric Single Oven "oven element bent" Questions

...oven, the lower heating element started sparking when turned on, and now it looks like it has a 'bubbled' area (about inch long) on it and it looks bent on one area. I guess I need to replace this ...

...oven to the element check and see if the two wires coming out of the back of the inside to the element are disconnected usually it's a Phillips head screwdriver now if you broke one of those wires ...

...the back to install wire . . some oven do have lifo off doors but they also may have a screw in the hinge . so ck .. and if element was good then look at function or thermo as having the

...oven element Hello. The oven is a particularly sturdy piece of kitchen equipment. It can handle daily use and still perform as needed. But of course, as with everything over time, the oven can ...

...element of top oven and the bent down large square heating element of bottom oven. Top oven works fine, but when switcing bottom oven on, we hear a sound like the fan is touching something. We pulled ...

oven - me272 Hello- Check these things first-  Door seals tend to get stiff over time. This is normal. Door hinges can become loose or get bent a bit, causing door to not close tight. This little

...oven element blew on our electric oven Removed the old element and bought a new one, but didn't make a note of where the wires go. Need a simple wiring diagram to reconnect the new one (before the ...

...oven, then reach in with a screwdriver or your hand if you can and push the little red buttton down untill it clicks. The cause for this to trip could be bent door hinges not allowing the door to ...

Oven. Does the lower heating element come out from the front of oven or do you need to gain access to rear in order to test/replace it? I removed the mounting screws but it doesn't seem to want to

element? once the back has been removed and oven switched off at the wall hunt for the two spade termal prongs that are from the element pull off wires,there is one or two small crews or two bent over