Copystars Cd Dvd Duplicator Barebone Kit 1-3 Copier 5 Bay Ide "burner read discs" Questions

...burner? I followed instructions, but it said "cannot read disc." I also flipped the disc and tried that but got the same results. Hello my friend,you burner reads DVD-R / -RW / -R DL so if you have ...

how much it cost? Is only for burn the cds? Is only for burn discs? CDRW stands for compact disc read write. Does not mean it will read dvd's, but should give you access to read data discs.

Burner does not read the discs. I have tried all the compatible discs and nothing. None of them can be read. try a firmware update and then if it still dosnt see the disc make sure if its old to check

...burner will not recognize a blank disc. I have attempted to use both "Roxio DVD Builder" and "Photo DVD Maker Pro" without success. I can put a commercial DVD disc in or one I had previously written ...

NEC DVD-rw Can't read CD disc Something is wrong with my NEC DVD-rw 3540 in my desktop PC. It can read DVD disc, but can't read cd disc? thanks! regards, Lang You have to download aspi drivers and ...

TEAC DVW-D11 will not burn DVD's. Error code reads source drive F-> read disc error. teac dvw d11 will not burn dvd,s it says source drive f-> read disc error

...burner (CU-VD10) that reads: "incompatible disc! change disc". this same message appears on all new dvd-rw discs used with the device. No Problem..... Purchase any of these DVD-R 4X or 8X and/or also ...

no disc present once i inserted a disc it was reading well but during reading it stop reading suddenly and after that i never read any disc and when ever i insert any disc tried so many it gives same ...

cannot read disc Hello, There are a couple of things you can try here. First, try a different disc. If it reads another disc then it's likely the disc you are using. It could be scratched, it could be

...read drive and disc burner: ·The disc burner must feature buffer underrun protection, or the drive must be capable of delivering the data sufficiently quickly. The read speed should be at least ...