Question about Gaggenau Kitchen Appliances - Others
...replace the Thermostat. (Sometimes it's the solenoid prior to the thermostat that caused the thermostat to burn out, if that is the case, you will need to replace both, or it will just burn our your ...
Question about Pitco Frialator Kitchen Appliances - Others
...operating thermostat.. maybe over heating.. if so replace thermostat.. if pilot cuts out completely prematurely without reaching set temp then replace overtemp cut out thermostat as it is ...
fryer heats up but does not maintain proper temp. last year replaced hi limit reset & today replaced thermostat Hi there. You may need to calibrate the new thermostat and in doing so, you will ...
Question about Kitchen Appliances - Others
...replace thermostat ?? Hi there. Your fryer may have problem in cutting off the heating element power (electric fryer) or burner flame (gas fryer) for temperature regulation which is thermostat's ...
Question about Frymaster Dean Kitchen Appliances - Others
...control is bad, you will need to replace the thermostat switch and everything will work just fine. Basically the thermostat switch is not sending a signal to the gas valve telling to to turn ...
Question about Pitco Frialator Kitchen Appliances - Others
...replace the thermostat on a pitco fryer? Drain the fryer. Cleaning the kettle will make things easier. Remove the thermostat knob and remove the two screws that hold the thermostat. Remove the two ...
fryer overflows often, turned thermostat down from 350 to approx 340 but food does not cook then. could the thermostat be bad? 10 degrees should not make that much difference. Does the fryer have a" ...
...But when burner flame remains on after shutting off the thermostat, the thermostat's mechanical contacts are shorted or remained engaged. If this is tha case, you have to replace the
Question about Pitco Frialator Kitchen Appliances - Others
...higher than the present oil temperature and does not "click" it is a bad thermostat and needs replacement. Clicking sound on thermostat indicates closing of the mechanical contacts. Physically ...
13 questions posted
Usually answered in minutes!
41 Questions
30 Questions
7 Questions
6 Questions
2 Questions