print does not print. ink light flash. print does not print. ink light flash. News flash News Flash... Need Ink, Need Ink... I'd start by lifting lid and check my printing ribbon runs ok....
...print fine. I have used these forms before, so I know that is not the problem. ANY ideas? Hi, I have come accross this problem on a number of sites. It may be the Paper Out sensor. It works by ...
...print job and i get "057 close platen" message on printer. I checked to make sure platen lever is set to "C" thickest setting and still get "057 close platen" message. printer also peeps and ...
Question about IBM 6400 Office Equipment & Supplies
...print fades to almost nothing. It's extremely difficult to read the ride side of the paper... Please help me! Platen Gap Adjustment (Figure 35) IMPORTANT Only do this procedure if the original ...
Print cartridge light The light blinks when there is a problem with a print cartridge. When the problem is corrected and the top cover is closed, the light will stop blinking. Troubleshooting blinking
...light: When the print cartridge is low, the Toner light illuminates. When the print cartridge is out of the printer, the Toner light blinks. 3 Paper out light: Indicates that the printer is out of ...
Question about IBM 6400 Office Equipment & Supplies
...to print. The Busy message is displayed as the pages print. The Ready light is on when theprinting stops.• Press and release Cancel to cancel printing.• Press and hold Cancel to reset the
...print-cartridge light is blinking, and the printer stops printing. The print cartridge is empty or missing. The printer cannot detect the print cartridge correctly. 1. Reinsert or replace the ...
...light: When the print cartridge is low, the Toner light illuminates. When the print cartridge is out of the printer, the Toner light blinks. 3 Paper out light: Indicates that the printer is out of ...
...light. It does print well except for the lightness. The toners are displayed as 96% remaning and the drum unit 100%. Any help appreciated. Thanks, Norm I would suggest using the printer's menu and ...
103 questions posted
Usually answered in minutes!
13 Questions
13 Questions
3 Questions
2 Questions
4 Questions