IBM Infoprint 1352 Laser Printer "change fuser temp" Questions

Change at the same time. Fuser needs to be rebuilt or replaced. (Check for wear and tear) Inexpensive repair for the temp fix. The whole Fuser cost can brake the bank. I buy parts from precisionroller

...device Fuser thermistor (middle front) - thermal control device Fuser thermistor (rear) - thermal control device These items wear out. Change at the same time. Fuser needs to be rebuilt or

...fuser to suit the paper type, no it is not a power supply problem change paper type to card stock/thick/letterhead etc to suit then machine will adjust temp to suit.. ie file, print properties paper ...

...fuser temp. We notice the fuser never gets above 120. if you reading it right on the screen an e 000100 is a laser failure it also happens on this model if you run it with the toner assy out of ...

...Fuser temperature too low E004 SSR, or lamp reg. board E010 Drive problem E022 DV unit switching problem E030 Counter not working/open E202 Scan problem. Scan sensor, scan motor E204 Scan problem. ...

...paper exits and the rollers get HOT). All copiers have the same principals, my advice is to change the Thermistor in the fuser (it controls the temp) one vendor that I use a lot is ...

FUSER SETTINGS ARE THERE YOU CAN OPEN FUSING TEMP AND CHECK THE TEMPS AT THE TIME TO SEE IF THEY ARE RIGHT.. IF IT SEEMS RIGHT IT MIGHT HAVE BEEN A READ ERROR AND BY GOING INTO MODE AND LOOKING FOR 5-

...fuser roller and the fan and the temp board and the temp. I don't know what next to do. Did you changed fuser unit?1. poor thermistor connector contact2. thermistor broken or installed ...

...Fuser temp"...Help please your xerox phaser is in fuser light is checked is not courently okthis parts is damaze? then changing the fuser temp and new added. No, it does not solve the problem...... ...

Gestetner sp 1100sf error fuser temp. ? your fuser is burn out you must change new fuser.