...error message. If you want you can replace that rubber roller to fix the problem, however first thing I do is to take that rubber roller out (remove tray and look underneath to find the roller) and ...
...Replace PQ Kit The transfer roller and transfer belt cleaning roller are exhausted. Install a new transfer roller and a new transfer belt cleaning roller. TX Comm Error An outgoing fax transmission ...
...tray 1 error code 201.52 plz advice If you remove tray 1, is there a jam? When the printer is starting to print, does it sound like it is trying to pick up paper from the tray a few times, and then ...
Question about IBM Office Equipment & Supplies
...error- Paper size is set correctly and size switch actuator is OK. I tried another tray and also tray 1 (manual feed tray). That tray jams- no lift to feed roller. Any ideas? Im going to check and ...
...Error 391: CLEANING THE FEED ROLLER AND THE PAD Clean the feed roller and the pad when [391: Paper Jam] appears frequently. (1) Remove the paper cassette. (2) Clean the feed rollers (large and small) ...
...tray 1 loaded with a4, printer will detect it as letter and it gives 024-964 error. Any solutions will be appreciated? More then likely the paper feed rollers are worn. These rollers are replaceable, ...
Question about IBM Office Equipment & Supplies
...error: Check for a missing KL-clip securing the Head Maintenance Clutch. Replace if missing. Did this correct the problem? Complete. Go to Step 5. 4 For an 8,009.43 error: 1. Ensure that there is no ...
...tray is usually the 1st one to fail. Hope this helps! 13.01 error is sometimes caused by the sensor spring behind tray1 paper pickup that is attached to the paper feed assembly position the spring ...
Question about IBM Office Equipment & Supplies
...error 13.00 common faults for poor feeding on lj5200 1, feed rollers are worn - replace 2, sep pad is worn ( cant seperate pages correctly)- replace 3, paper empty tray sensor actuator arm snapped - ...
Error message Tray1 Load LTR Check the paper settings, tray is set to letter. Tray 1 is running our of paper, check paper guides and properly load paper on tray. For further assistance, please contact
98 questions posted
Usually answered in minutes!
497 Questions
123 Questions
82 Questions
58 Questions
36 Questions
